7 Reasons for Vinyl Flooring Bulging:
1. Self leveling problem
2. The glue is not dry in place
3. Uneven foundation ground
4. Cement floor Expansion joint
5. Incorrect selection of auxiliary materials
6. Non standardized construction
7. Insufficient exhaust
How to Remove Adhesive & Glue on the Vinyl Flooring?
1. Clean the adhesive on the floor that has not solidified before
2. Remove the solidified adhesive from the floor
There are three basic processes for plastic floor welding lines: slotting, hot welding, and flattening of welding seams.
Primer can enhance the adhesion of the old interface and reduce the absorption of the base layer. Seal the original foundation, block dust and moisture, and enhance the compactness of the base layer.
ESD Anti-static conductive or dissipative vinyl flooring installation will be very important to get the good ElectroStatic Dishcarge result.
We will give an ultimate guide in this article.
Project name: Wuhan Third Hospital
Project area: 130,000 square meters
Flooring supplier: Longda Flooring (Homogeneous vinyl sheet hospital flooring)
Hospital flooring is very important.
During the past, the hospital flooring is made by other materials. But right now more and more hospitals are using homogeneous vinyl sheet flooring when their doing hospital renovation.
Longda Flooring wood look heterogeneous vinyl sheet flooring is the commercial flooring for your choice.
3 Creations in Vinyl Flooring
1) Product innovation
2) Production facility innovation
3) Management innovation
Project name: Guangzhou Huangmin Orthopedic Hospital
Project area: 100,000 square meter
Flooring supplier: Longda Flooring Homogeneous vinyl sheet flooring & ESD vinyl sheet flooring
Copy right by Longda China