Menu
Vinyl flooring refers to the flooring produced with PVC materials. Specifically, it is produced by taking polyvinyl chloride and its copolymer resin as the main raw material, adding fillers, plasticizers, stabilizers, colorants and other auxiliary materials on sheet continuous substrate through coating process or calendering, extrusion or extrusion process
Other name: PVC flooring, homogeneous & heterogeneous vinyl flooring.
Categories included: Vinyl sheet flooring, vinyl tile, vinyl plank, WPC and SPC.
Vinyl flooring is one of the most popular floors today for good reasons – it’s attractive, easy to maintain and durable. But to make these floors look high-end and clean and continue to provide you with high-quality service, you must take good care of them.
One way is to clean regularly. Fortunately, cleaning vinyl floors is a simple and not costly job.
In this article, we share 6 tips for properly cleaning vinyl flooring so that you can maintain its good appearance and original luster for many years.
It’s an in-depth article that takes 30 minutes to read.
Navigation, click to jump to the section you want to read
It’s easy to feel unhappy when water is sprinkled on the vinyl base plate, but this is an easy problem to solve. As long as you clean up immediately, you should be able to keep the floor clean and beautiful.
When you leave the water on it for a few days without cleaning, the problem will appear, because in doing so, the water will become an annoying stain stuck to the stain, which may take more time and special equipment to remove. In particular, sugary drinks may be more difficult to clean if they are kept on the floor until they dry naturally.
To maintain the original vinyl look of the floor, make sure to wipe off any spills while the floor is still fresh. You can make it with sponge or soft cloth.
A useful principle for choosing vinyl floor cleaners is to choose the mildest cleaner possible. For example, cleaners such as vinegar are completely harmless, which will largely keep the floor from being damaged.
To make a simple vinegar solution, pour a cup of apple cider vinegar into a clean bucket and add about a gallon of warm water. Then mop the floor.
Apple cider vinegar contains a high concentration of acid, which can gently clean the vinyl floor without leaving residue. This is important because it not only helps to clean the floor quickly, but also helps to prolong the service life of the floor.
Don’t worry about the unpleasant smell of vinegar on the floor. When the floor is dry, the smell of vinegar will disappear.
If you want a little shine, add a tablespoon of jojoba oil to the solution.
But what if you’re not a jealous person? don’t worry! You can always buy other cleaners designed specifically for vinyl flooring.
Like cleaners, the type of mop you use on the vinyl base plate can quickly clean the floor. That is, you must use a mop without a built-in brush.
Microfiber mop is the best choice for cleaning the floor. It is soft, can protect the surface from unnecessary scratch and wear, and maximize the protection of the floor.
You might ask, how about a steam mop?
Of course, steam mops are very popular now, but if you want to maintain the beautiful appearance of the floor, you don’t want to use steam mops on vinyl base plates.
The steam mop releases too much water, which can damage the lamination of the floor. More Than This. The excess heat released by the steam will melt the glue that sticks vinyl under the floor, making it weaker and even easy to fall off.
No matter how difficult it seems to remove stains or dry substances from the vinyl base plate, always scrub gently.
Of course, scrubbing hard may get you done quickly, but it will only easily tarnish the floor. If you keep doing this, the vinyl finish will begin to wear out.
When using, never try to remove the dry material on the vinyl base plate with a knife or any sharp object, because it will leave permanent scars on the floor.
Instead, soak these areas in a solution suitable for sticking. After the stain is saturated, remove it with a mop or soft cloth.
Wear marks can be troublesome, especially if you’ve just installed vinyl flooring. Fortunately, they are not permanent, and you can easily fix them using the following methods:
you ‘re right! Just roll the tennis ball over the scratch and keep rolling, and the trace will be erased after a few minutes.
If the tennis ball can’t remove the wear marks, try a rubber eraser. Rub marks back and forth until they are completely invisible.
Some wear marks may be too stubborn for tennis balls or rubbers. If so, you may want to consider an oil-based solution.
Just dip jojoba oil on a soft towel and gently wipe the stain until all traces disappear. Finally, don’t forget to rinse the area with water and vinegar; This will help remove any residual oil.
If you use detergents or other vinyl floor cleaners for cleaning, make sure to wash properly when mopping the floor. After mopping the floor, prepare a bucket of clean water to wash the floor surface.
Ignoring this simple step may leave the cleaner on the floor. Over time, it will accumulate and begin to sink into the bottom dirt, which may be difficult to clean.
When you walk on the floor, make sure the floor is completely dry. This way, dirty footprints won’t stain the floor that you cleaned after spending hours cleaning.
While the above recommendations will help clean vinyl floors, the best and easiest way to actually clean such floors is to prevent dirt from entering first. Here are a few things to achieve this goal:
Dust, chemicals and tiny gravel particles can be trapped on the outsole of shoes and carried into the vinyl floor, which may damage the floor.
Over time, these objects not only cause the floor to turn yellow and black, but also may cause scratch damage to the floor due to their abrasiveness.
You can solve this problem with doormats and shoes before entering the house. If you can take off your shoes, it’s even better; It will keep the floor clean for longer and further reduce the chance of scratching the floor.
Get into the habit of cleaning up dust, because if you let it accumulate on the vinyl base plate, it may stick to the floor when people step on it. Clean your floor every day to prevent the accumulation of various factors from making the floor dirty.
Use a vacuum broom or dry mop to remove daily dirt and debris, but do not use a beater. Although beaters are ideal for collecting dirt, they are not friendly to vinyl base plates because they are too harsh to scrub the floor. Use only soft accessories.
Areas with heavy traffic tend to get dirty quickly, which means you need to mop the floor more often to keep it clean.
If you’re like most homeowners, you don’t want to spend the whole weekend cleaning vinyl base boards. That’s where carpet throwing comes in.
Strategically placing them in crowded areas, such as standing near the sink when washing dishes, helps to ensure that the floor is always clean. This additional filler also helps to improve the durability and service life of the floor.
Heavy furniture may cause dents and scratches on vinyl base boards, which is what suggests foams for furniture feet.
When moving furniture in a room, it is also important to avoid dragging the furniture onto the floor, as this may leave wear marks. In this case, just lift the furniture or use a piece of plywood.
Although the quality of vinyl base plates is very reliable, regular cleaning helps them play a better role.
If you have recently installed vinyl flooring in your home, follow these tips to keep it clean and shiny:
This article is written by Longda Flooring (www.longdaflooring.com), a leading vinyl sheet flooring manufacturer from China.
Please contact Longda flooring for a free quote on your vinyl flooring needs. We have quick response, efficient communication, quality products, on time delivery, and competitive price.
Copy right by Longda China