Menu
Homogeneous vinyl flooring and heterogeneous vinyl sheet can provide customers with a variety of color combinations and texture choices, and design suitable flooring combinations for different areas. Fire resistance is a performance factor that is often considered in decoration, which is related to the safety of personnel. The fire resistance performance of vinyl sheet flooring with qualified quality can reach B1 level, which means its fire resistance performance is better, second only to stone.
Vinyl flooring has a large volume area and fewer joints, making it more suitable for showcasing high-end atmosphere in spacious areas such as corridors and halls. PVC flooring comes in various colors and is easy to cut. You can choose different colors for assembly, which not only showcases individuality but also avoids monotony.
Vinyl flooring is made of high-end PVC raw material, which fundamentally overcomes the ice, cold, hard, and slippery characteristics of traditional Chinese stone, floor tiles, terrazzo flooring. The surface temperature often provides a suitable range for our human body to develop. Walking barefoot on a floor and passing through it will also feel warm like spring, comfortable and natural.
There are many types of homogeneous flooring, with multiple colors to choose from, realistic and beautiful lines, and rich and colorful accessories and decorative strips that can be combined to create beautiful decorative effects
Vinyl sheet flooring is very suitable for large-scale installation. It is widely used in many large-scale engineering renovations, such as schools, hospitals, kindergartens, offices, dance halls, sports halls, etc! So how is it acceptable to flooring installation quality after the project is completed?
Navigation, click to jump to the section you want to read
The variety, specifications, color, and grade of vinyl sheets and rolls used for the surface layer. Vinyl flooring should comply with design requirements and current national standards.
Inspection and analysis method: Inspection can be carried out through observation, and the qualification certificate documents and testing work reports of the materials can be checked.
The adhesion between the surface layer and the next layer should be firm and not caused by warping, delamination, or overflow.
Inspection method: Visual inspection and use hammering, and use a steel ruler for inspection.
Attention: The area of the partial delamination part of the coil should not exceed 20cm2, and the spacing should not be less than 50cm. If each natural room (standard room) does not exceed 5% of the total number, the local delamination position at the corner of a single floor slab can be ignored.
The surface of vinyl flooring should be kept clean, the ground pattern should be clear, and the color should be consistent. The panel joints should be tight and beautiful, and the pattern at the joints should be consistent. No glue marks: The joint with the wall should be strict, and the edges of the inner and outer corners should be square.
Inspection method: Conduct visual inspection.
The welds between plates should be smooth and free of defects such as coking discoloration, spots, welding tumors, and scaling. The allowable deviation for the unevenness of the weld seam is ± 0.5%. At 6 mm, the tensile strength at the weld seam shall not be less than 75% of the strength of the plastic sheet
Inspection method: Visual inspection and inspection report inspection.
The material management requirements for edge banding include accurate dimensions, neat edges and corners, straight seams, and tight seams.
Inspection method: Visual inspection with a steel ruler.
Whether installing vinyl flooring in homes or commercial places, the installation and acceptance must comply with the standards of vinyl flooring installation and acceptance specifications. When installing and accepting polyvinyl chloride plastic flooring, if certain items cannot be visually completed, a steel ruler should be used as much as possible to ensure accurate values.
Copy right by Longda China